Loading...
HomeMy WebLinkAbout2021-04-05-J14 Ambulance PurchaseCITY OF WAUKEE, IOWA CITY COUNCIL MEETING COMMUNICATION MEETING DATE: April 5th, 2021 AGENDA ITEM:Consideration of approval of a purchase of a 2022 ambulance from Foster Coach Sales. FORMAT:Resolution SYNOPSIS INCLUDING PRO & CON: The fire department is replacing a 2011 F-450 ambulance. This purchase is being conducted through the Houston Galveston Area group purchasing consortium. The expected life of the chassis is approximately ten years. FISCAL IMPACT INCLUDING COST/BENEFIT ANALYSIS: The total cost of the ambulance is $240,413. This includes $6,000 in miscellaneous communications equipment and cot upgrades that will be supplied by Waukee or completed after delivery. After the arrival of the ambulance we will sell the existing ambulance for an estimated $20,000 - $30,000. The full price of the ambulance will be paid for by CARES funding received from the federal government in the current FY. COMMISSION/BOARD/COMMITTEE COMMENT: STAFF REVIEW AND COMMENT: Staff recommends approval. RECOMMENDATION: Approve the resolution. ATTACHMENTS: I. Proposed Resolution & Agreement PREPARED BY: Fire Chief Clint Robinson REVIEWED BY: PUBLIC NOTICE INFORMATION – NAME OF PUBLICATION: DATE OF PUBLICATION: AGENDA ITEM: J14 THE CITY OF WAUKEE, IOWA RESOLUTION 2021- AUTHORIZING THE PURCHASE OF A 2022 AMBULANCE FROM FOSTER COACH SALES OF STERLING, IL IN THE AMOUNT OF $240,413.00 [WAUKEE FIRE DEPARTMENT] IN THE NAME AND BY THE AUTHORITY OF THE CITY OF WAUKEE, IOWA WHEREAS, the City of Waukee, Iowa is a duly organized municipality within Dallas County; AND, WHEREAS, on June 20, 2011, the Waukee City Council approved the purchase of an ambulance from Feld Fire of Carroll, IA, in the amount of $160,000.00 (Resolution #11-100); AND, WHEREAS, there is a need to replace the 2011 ambulance, as the expected life of the ambulance chassis is approximately ten years; AND, WHEREAS, on November 2, 2020, the Waukee City Council approved an Interlocal Contract for Cooperative Purchasing between Houston-Galveston Area Council (H-GAC) and the Waukee Fire Department to provide product pricing that is pre-negotiated, negating the need for the specification and public bidding process (Resolution #2020-418); AND, WHEREAS, through the H-GAC group purchasing consortium, the Waukee Fire Department recommends approval of the purchase of a 2022 ambulance from Foster Coach Sales of Sterling, IL, in the amount of $240,413.00; NOW THEREFORE BE IT RESOLVED by the City of Waukee City Council in session this 5th day of April, 2021, that it hereby authorizes the purchase of a 2022 ambulance from Foster Coach Sales of Sterling, IL in the amount of $240,413.00. ____________________________ Courtney Clarke, Mayor Attest: ___________________________________ Rebecca D. Schuett, City Clerk RESULTS OF VOTE: AYE NAY ABSENT ABSTAIN Anna Bergman R. Charles Bottenberg Chris Crone Larry R. Lyon Ben Sinclair February 27, 2021 Spec Writer: Levi C. Spec Designer: PRELIMINARY BUILD SPECIFICATION Quote # QUO0000006012 Production # Document Rev. # 2 Status: Ready for Submission Prepared For:Presented By: Tony Clemen Gary Picha Waukee Fire Department Foster Coach 1300 SE L.A. Grant Parkway 903 Prosperity Drive Waukee, IA Sterling, IL 50263 61081 Phone:Phone: 800-369-4215 Option QTY Description CHASSIS 1000-0002 1 AMBULANCE SPECIFICATIONS 1000-0923 1 CHASSIS, 2022 FORD F-550 4X4, 193, GAS The chassis required to complete the ambulance conversion shall be supplied by Horton. SPECS AND PRICING ARE PENDING.   SR00116559 1 CHASSIS OPTIONS - Include (4) traction tires on rear - (2) All-Position tires on front.  Delete Hi-Mount stop lamp (59H) SR00116587 1 Apply GPC Discount  FIN Code:  QI173 1000-0071 1 CHASSIS ORDERED WITH ALUMINUM WHEELS The specified chassis is to be ordered to include OEM aluminum wheels. 1000-0451 1 PASS THROUGH CAB/MODULE, F SERIES Install a pass-through opening between the cab and module. Pass-through to include a bellows connection. 1000-0083 1 STANDARD CAB HEIGHT The specified chassis will have the standard cab height. 1000-0346 1 MUD FLAPS, REAR, LARGE W/LOGO Install individual rear mud flaps behind each set of rear wheels. Mud flaps to include Horton logo. 1000-0087 1 REAR DOCK BUMPERS Install two (2) black rubber standard sized dock bumpers. Locate one on either side of the rear step on the end caps. 1000-0090 1 REINFORCE REAR BUMPER END CAPS Reinforce end caps of rear bumper for greater impact resistance. 1000-0220 1 RUNNING BOARDS: STAR PUNCHED, F SERIES Quote # QUO0000006012 February 27, 2021 Page 2 Spec Writer: Levi C. Spec Designer: Install heavy duty aluminum diamond plate running boards and splash shields. Running boards are to be star punched for enhanced drain and foot grip. 1000-0227 1 REAR STEP/ BUMPER ASSEMBLY, F SERIES Install a diamondplate rear step/bumper assembly with flip-up center section. SR00116561 1 Apply rustproofing to all exposed steel bumper mounting components after assembly. 1000-0149 1 LIQUID SPRING SUSPENSION, F 550 Install a Liquid Spring hydraulic rear suspension. Wire system to dump when the left rear entry door is opened. Install manual controls in the cab near the driver. 3000-0407 1 RECEIVER/DRYER KIT, FORD F-SERIES CHASSIS Install standard receiver/dryer kit w/pressure switch in the air conditioning system. BODY 2000-0179 1 AMBULANCE BODY Conversion model is to be a 623F-I using a Ford F Series chassis. Body length is 173". SR00117953 1 Reduce body length 2" aft of axle.  Body length to be 171". SR00116579 1 CRASH BARRIER CONFIGURATION -  Actual Dimensions: 31.5"W X 58.56"H  Clear Opening:       28.87"W X 45.44"H X 20.3"D  Note:  Bench length will not accommodate a back board.  Install a diamond plate crash barrier compartment with a single hinged exterior door with dual Nader pins.  Dimensions include 6" drop skirt.  Install a sweep-out floor fabricated from flat aluminum with a D/A finish.  Install a stainless steel sill plate.  Install (3) adjustable diamond plate shelves in compartment. Size the flange height to be even with the Dri-deck. Locate (1) shelf at interior floor level and (2) spaced evenly above in the I/O.  Extend the Interior I/O as close to floor as possible.  Interior I/O access to covered by a cargo net (spec'd elsewhere) 2000-0013 1 HEADROOM, 72" The headroom is to be 72". 2000-0625 1 ALUM. DIAMONDPLATE AT SIDE STEPWELL Fabricate the stepping surface inside the side access door using polished aluminum diamond treadplate. 2000-0245 1 DOUBLE STEP CURBSIDE ENTRY, 6" DROP SKIRT Fabricate curbside of body with 6" drop skirt. To include two step side entry. 2000-0246 1 STREETSIDE 6" DROP SKIRT <p>Fabricate streetside of body with 6" drop skirt. </p> 2000-0250 1 SOUND PROOFING/ACOUSTIC ENHANCEMENT PACKAGE Install standard sound control package. 2000-0259 1 PRIVACY WINDOWS, FIXED, REAR ENTRY DOORS Install privacy tinted solid fixed windows in the rear module access doors. 2000-0263 1 PRIVACY WINDOW, SLIDING FOR SIDE ENTRY DOOR Install a sliding tinted privacy window in the side access door. 2000-0265 2 EMERGENCY RELEASE, REAR DOORS Install standard emergency release knobs on top and bottom of the rear module entrance doors. Quote # QUO0000006012 February 27, 2021 Page 3 Spec Writer: Levi C. Spec Designer: 2000-0704 1 EMERGENCY RELEASE, SIDE ACCESS DOOR Install emergency release knobs on top and bottom of the side module entrance door. 2000-0010 1 DOOR HANDLES Install Tri-Mark free floating style door handles with pre-stretched stainless steel cables. Include three piece interior door panels on all access doors. 2000-0811 1 VI-TECH MOUNTING, F SERIES Install standard Vi-Tech body mounts. 2000-0270 1 MIRROR STAINLESS STEEL SPLASH SHIELDS Install #8 mirror stainless splash shields on the lower front face of the body just behind the cab access doors. These splash shields are to be the same height as the diamond plate front corner guards. 2000-0690 1 FENDERS, STAINLESS, STD, CS 6" DROP SKIRT Install a stainless steel fender, for use in conjunction with a 6" drop skirt, at the curbside rear wheelwell location. 2000-0691 1 FENDERS, STAINLESS, STD, SS 6" DROP SKIRT Install a stainless steel fender, for use in conjunction with a 6" drop skirt, at the streetside rear wheelwell location. SR00116562 1 FENDER NOTE - Vehicle includes a 6" streetside and curbside drop skirt.  Install fenders for a 3" drop skirt on both sides and lengthen the rub rails so they extend below the fenders forward of the rear wheels. SR00116564 1 BLACK PVC RUB RAILS - Install 1" x 2" black PVC rub rails - (4) total.  Rub rails to be spaced away from body using rubber Fastenal bushings #10818-01614. The through bolted design will be extended through the lower body rail and have a locking nut on the back side.  Extend rub rails below fenders forward of the rear wheels.  2000-0276 1 EXTENDED DIAMOND PLATE CORNER GUARDS Install extended diamond plate corner guards that extend to the bottom of the paint stripe or pin stripe which ever is applicable. 2000-0652 1 STANDARD CORNER GUARDS Install standard height polished diamondplate corner guards. SR00116563 1 Extend corner guards to 36"H 2000-0281 1 REAR DOOR HOLD OPENS, GRABBER Install chrome Cast Products "Grabber" style rear door hold opens. (NOTE: HOLDOPENS MUST BE RELOCATED IF TELESCOPIC LIGHTS ARE ORDERED) 2000-0583 1 ENTRY DOOR THRESHOLDS, LINE-X Apply black Line-X to the side and rear entry door thresholds. Delete the standard anti-slip tape. 2000-0584 1 REAR RISER ADP The rear riser is to be fabricated out of polished aluminum diamondplate. 2000-0684 1 LICENSE PLATE BRACKET, CENTER OF RISER Install a recessed rear license plate bracket centered in the rear riser. Include an LED license plate light. 2000-0598 10 DOOR REFLECTORS All patient compartment entry doors to include standard red reflectors. SR00116569 1 REFLECTOR NOTE - Delete all stick-on rectangular reflectors on interior entry door panels.  Install exterior reflectors only. COMPARTMENTATION Quote # QUO0000006012 February 27, 2021 Page 4 Spec Writer: Levi C. Spec Designer: SR00116735 1 ADDITIONAL COMPARTMENT VENTING -  Provide additional venting in the following compartments:  - Streetside Rear  - Curbside Rear SR00116736 1 D/A FINISH ON SWEEP-OUT FLOORS - All sweep-out floors shall be fabricated from flat aluminum with a D/A finish. SR00116878 1 COMPARTMENT DOOR SWING -  Where possible, all exterior compartment doors shall open to 110 degrees. 2900-1552 1 STREETSIDE FORWARD COMPARTMENT The height of the streetside front compartment is to be the full available height of the body. See drawings for compartment dimensions. Compartment is to include standard LED strip lighting and a single hinged door. 2000-0401 1 SS FORWARD COMPT. FLAT ALUMINUM The streetside forward compartment is to be fabricated from flat aluminum.  2900-0004 1 ADJUSTABLE SHELF STREETSIDE FRONT Above Oxygen Cylinder - Right Side of Divider Install diamond plate adjustable shelving in the streetside forward compartment. Locate as noted. 2900-0219 1 FIXED VERTICAL DIVIDER, STREETSIDE FRONT 11" from LEFT Wall Install a 16" deep fixed vertical divider in the streetside forward compartment. Locate as noted above. 2000-0225 1 SWEEP OUT COMPARTMENT FLOOR, SS FRONT Streetside forward compartment floor is to be sweep-out style. 2900-0095 1 SILL PLATES, STREETSIDE FRONT Install a stainless sill plate on the streetside forward compartment. 2900-1556 1 STREETSIDE INTERMEDIATE COMPARTMENT The height of the streetside intermediate compartment is to be reduced to allow space for an interior cabinet located below the interior countertop. See drawings for compartment dimensions. Compartment is to include standard LED strip lighting and double hinged doors. 2000-0402 1 SS INTRMDT COMPT. DIAMONDPLATE The streetside intermediate compartment is to be fabricated from diamondplate.  2000-0587 1 CEILING MOUNTED ELECTRICAL EQUIPMENT Add-on electrical equipment is to be installed on the ceiling of the streetside intermediate compartment. 2000-0624 1 SWEEP OUT COMPARTMENT FLOOR SS INTERMEDIATE COMPT Streetside intermediate compartment floor is to be sweep-out style. 2900-4005 1 SILL PLATES, STREETSIDE INTERMEDIATE Install a stainless sill plate on the streetside intermediate compartment. 8000-0145 1 SS WHEELWELL COMPARTMENT, DELETE Vehicle is not equipped with a streetside wheelwell compartment. SR00116839 1 STREETSIDE REAR COMPARTMENT  The dimensions of the streetside rear compartment are to be as shown in the drawings (623). Compartment is to include standard LED strip lighting and single hinged door.  Modifications - Compartment width to be narrowed 2" to 34.63" (I.D.)  Note - Include a single hinged door.  Quote # QUO0000006012 February 27, 2021 Page 5 Spec Writer: Levi C. Spec Designer: 2000-0404 1 SS REAR COMPT. DIAMONDPLATE The streetside rear compartment is to be fabricated from diamondplate.  2900-0216 1 TOOL MOUNTING PLATE; STREETSIDE REAR Install a .25" thick aluminum plate on the back wall of the streetside rear compartment. Plate is to have a D/A finish. Install (2) aluminum 'C' channels to the wall and secure the plate using the 'C' channels. SR00117446 1 Tool plate to be as large as possible on back wall.   Notch the upper LH corner to allow for the surface-mounted 110-volt outlet per drawing. 2000-0608 1 SWEEP OUT COMPARTMENT FLOOR SS REAR COMPT Streetside rear compartment floor is to be sweep-out style. 2900-4007 1 SILL PLATES, STREETSIDE REAR Install a stainless sill plate on the streetside rear compartment. 2900-1564 1 CURBSIDE REAR COMPARTMENT The height of the curbside rear compartment is to be the full available height of the body. See drawings for compartment dimensions. Compartment is to include standard LED strip lighting and a single hinged door. 2000-0408 1 CS REAR COMPT. DIAMONDPLATE The curbside rear compartment is to be fabricated from diamondplate.  SR00116865 1 Modify the curbside rear compartment size to:  31.70"W x 50.65"H (All I.D.)  Notch the upper RH corner to accommodate the recessed drawers at foot of bench.  Include a diamond plate closeout to cover the recessed glove storage in rear portion of riser. 2900-4070 1 FIXED VERTICAL DIVIDER, CURBSIDE REAR 12" from RH Wall - Below Notch Install a 16" deep fixed vertical divider in the curbside rear compartment. Locate as noted above. 2000-0611 1 SWEEP OUT COMPARTMENT FLOOR CS REAR COMPT Curbside rear compartment floor is to be sweep-out style. 2900-4001 1 STAIR CHAIR POCKET, CURBSIDE REAR A stair chair pocket is to be recessed into the curbside rear compartment inner door panel. The pocket shall be installed as close to the bottom and hinged side of door as possible. See drawings for dimensions. 2900-2956 1 STAIR CHAIR MODEL, STRYKER #6252 A Stryker #6252 stair chair will be stored as noted. This is for sizing/placement purposes only. Horton is not to supply this equipment. 2900-4008 1 SILL PLATES, CURBSIDE REAR Install a stainless sill plate on the curbside rear compartment. 8000-0090 1 CS INTRMDT COMPT, DELETE Vehicle is not equipped with a curbside intermediate compartment. 8000-0143 1 CURBSIDE FRONT COMPT DOOR DELETE 2900-1204 1 DRI DECK, BLACK Black Dri-Deck is to be installed on the floor and shelving of all exterior compartments. To include tapered edge trim pieces where applicable. 2900-1206 1 RUBBER WALLS IN BB COMPT, BLACK The interior of the backboard compartment is to be covered with black rubber matting to protect equipment stored in this area. PAINT AND GRAPHICS Quote # QUO0000006012 February 27, 2021 Page 6 Spec Writer: Levi C. Spec Designer: 5000-0003 1 CHASSIS PAINT: WHITE Chassis color to be standard white. SR00116866 1 Chassis to arrive in OEM White - do not repaint.  Chassis and module to have a White over Red paint scheme.  Red Paint Number:  Crossmatch GM Victory Red (WA9260) to Sikkens equivalent.  Chassis A/B pillars and roof to remain OEM White.  Paint all others areas Red.  Paint the upper portion of the module and the entire roof White.  Paint break line to be at the bottom of the NFPA vents.  All areas below to be Red.  Paint rear corner rounds White - do not extend White across rear face.  All flat panels on rear to be Red. 5000-0189 1 MODULE PAINT White over Red (GM Victory Red) The module body is to be painted a special paint color and paint code as noted above. 5000-0014 1 PAINT PANEL: SAMPLE White over Red (GM Victory Red) A painted test panel shall be prepared with the paint color and number noted above, 5000-0500 1 PAINT 360 DEGREE CAMERA COVERS The 360 Degree camera covers are to be painted to match the body color. 5000-0081 1 DIAMONDGRADE CHEVRON, FULL REAR Fluorsecent Yellow Green, Red Install full rear body chevron pattern using Diamondgrade material. Install inboard or vertical corner posts and below upper drip rail.  SR00116578 1 CHEVRONS ON CENTER ENTRY DOOR PANELS -  Colors:  3M Red Film Overlay #1172  3M Fluorescent Yellow/Green 983-23  Size: 4" Demo Style "V" Layout Per Drawings  Add 0.25" Black Pinstripe Around And Between The Interior Door Panel Chevron Stripes SR00116841 1 PINSTRIPE ON REAR CHEVRONS -  Outline entire border of chevrons with a Red, non-reflective .50" vinyl pinstripe to match Red chevrons as closely as possible. 5000-0071 1 STAR OF LIFE, 36" Install 36" star of life on the module body roof per 'K' requirements.. 5000-0190 3 ACCESS DOORS RED SCOTCHLITE STRIP Install 2" x 12" strips of red Scotchlite at the top of each entry door placed horizontally. INTERIOR FEATURES 2000-0288 1 ACRYLIC COLOR: LIGHT TINT All acrylic doors to be light tint. 2000-0827 2 COUNTERTOP, GRAY GRANITE (1) Inhalation Area and (1) Crash Barrier Install solid surface countertop(s) in lieu of stainless steel. Material is to include radiused and tapered corners and is to have a polished finish. Color is to be Gray Granite. Locate as noted above. 2000-0592 1 PAINTED STANDARD INHALATION AREA WALLS The main wall action area walls are to be painted to match the remainder of the interior cabinets. 2000-0307 1 INHALATION PANEL, CG TECH COVERED The inhalation panel is to be fabricated from composite material and covered with CG Tech to match to color selected. SR00116815 1 PADDING/BEADING ON INHALATION PANEL - The padding/beading on the inhalation panel shall match the selected upholstery color. Quote # QUO0000006012 February 27, 2021 Page 7 Spec Writer: Levi C. Spec Designer: 2000-0642 1 POLAR WHITE CG TECH INTERIOR COLOR The patient area walls, inner door panels and inhalation panel (EXCLUDING the main cabinet wall and associated areas such as the action area, CPR seat and telemetry area when equipped) are to be finished with Polar White CG Tech material. Requires stainless risers and lower door panels. SR00118158 1 Cover the normally exposed painted wall surfaces of the inhalation area and the expanded CPR seat area with CG-Tech material. SR00117460 1 Install Loncoin II Flecks Onyx #150 (No Topseal) 2000-0324 1 STAINLESS STEEL RISERS Install stainless steel on the interior risers. If a cabinet riser accent stripe is ordered the stainless steel will stop at the bottom edge of the stripe. 2000-0325 1 STAINLESS STEEL LOWER DOOR PANELS Finish lower section of inside patient compartment doors with stainless steel. 2000-0669 1 WHITE CABINET COLOR All interior cabinetry is to be painted White. 2000-0709 1 CABINET PAINT TO BE SMOOTH The specified cabinet paint is to have a smooth finish. 2000-3014 1 GUNMETAL VACU-FORM VINYL COLOR All seat cushions, backrests and vinyl closeouts are to be covered in Gunmetal colored material. 2000-3011 1 VACUFORMED UPHOLSTERY All seat cushions including head and back cushions are to be vacuformed style with .5" overhang. Cushions are to be installed with Velcro around the full perimeter of the cushion. All closeouts are to be covered with matching material and installed per standard. Head, backrest and HOPS cushions are to be made and attached per standard. Bucket seats to be specified separately. 2000-0323 1 FIXED SEATBASE, 4" EXTENSION Install the standard aluminum fixed seat base for the attendant's seat specified. Extend the top plate 4" and install the seat 4" inboard from standard. 2000-0326 1 STANDARD FIXED SEATBASE Install the standard aluminum fixed seat base for the attendant's seat specified. 2000-1620 1 USSC CHILD, BLACK 4-POINT, GUNMETAL Install a vacu-formed Gunmetal USSC high back bucket seat with integral child safety seat and black 4pt seatbelt and safety vest. The seat to be adjustable front to rear and is to be mounted at the head of the cot. 2000-0680 1 4 POINT SEAT BELT CENTER OF BENCH, BLACK Install black 4-pt seatbelt with safety vest at the center position of the squad bench. 2000-0683 1 4 POINT SEAT BELT, CPR SEAT, BLACK Install black 4-pt seatbelt with safety vest at CPR seat location. 2000-0605 1 ALUMINUM INTERIOR CABINETS All interior cabinets are to be fabricated from aluminum. 3000-1118 1 TUBULAR AIRBAG, ATTENDANT'S SEAT Install a tubular airbag at the attendant's seat. Unit uses an angled upper inhalation cabinet and does not include a cabinet beneath the main countertop.  3000-1125 1 HEAD CURTAIN AIRBAG, ATTENDANT'S SEAT Install a head curtain air bag for the attendant's seat for use with a standard linen cabinet. 3000-1123 1 ROLL SENSOR Quote # QUO0000006012 February 27, 2021 Page 8 Spec Writer: Levi C. Spec Designer: Install the roll sensor in the standard location. Unit includes streetside airbags only. 3000-1127 1 TUBULAR AIRBAG, CPR SEAT LOCATION. Install a tubular airbag forward of the CPR seat. 2000-0575 1 CABINET TRIM RADIUSED Install smooth radiused trim molding on all applicable interior cabinets. 2900-0223 1 IV HANGER, CP WITH RUBBER ARM COT KNEE Install a Cast Products recessed IV hanger with rubber arm over the cot knee area. 2900-0212 1 IV HANGER, CP WITH RUBBER ARM COT FOOT Just Rearward of Rear Vent per Drawing Install a Cast Products recessed IV hanger with rubber arm over the cot foot area. 2000-1320 1 GRAB RAIL: 8FT YELLOW ANTI-MIC CENTER Curbside Edge of Center Ceiling Plate per Drawing Install a standard style 8' main grab rail with yellow anti-microbial coating. Locate centered in the patient area ceiling. 2000-1307 1 VERTICAL GRAB RAIL, 2' YELLOW, BOLSTER Install a standard style 2' grab rail with yellow anti-microbial coating. Locate on the bench bolster at the side access door angled upward toward the forward end. SR00118248 1 Install an Austin Hardware #09-01228 black molded grab handle on curbside rear riser for entry assist per drawing. 2000-1308 1 PATIENT DOOR GRAB RAILS: YELLOW ANTI-MICROBIAL Install standard 'V' shaped grab rails with yellow anti-microbial coating. Locate on the interior door panels of all three patient entry doors. 2000-0423 1 CEILING MATERIAL,  PLATINUM WHITE COMPOSITE The standard module ceiling material shall be platinum white aluminum composite. 2000-0578 1 FIRE EXTINGUISHERS: 5LB ABC SHIP LOOSE Supply and ship loose a five lb ABC fire extinguisher. 2000-0579 1 FIRE EXTINGUISHERS: 5LB ABC SHIP LOOSE Supply and ship loose a second five lb ABC fire extinguisher. STREETSIDE CABINETRY 2000-0337 1 LINEN CABINET Install a standard storage cabinet behind the attendant seat. 2900-1076 1 FIXED SHELF, UPPER LINEN CLOSET Fab and install a fixed aluminum shelf in the upper section of the linen cabinet. Shelf is to be painted to match the cabinet color. 2900-1078 1 FIXED SHELF, LINEN CLOSET, CENTER SECTION Fab and install a fixed aluminum shelf in the middle section of the linen cabinet. Shelf is to be painted to match the cabinet color. 2900-1082 1 FIXED SHELF, LINEN CLOSET, LOWER SECTION Fab and install a fixed aluminum shelf in the lower section of the linen cabinet. Shelf is to be painted to match the cabinet color. 2900-2029 3 SOLID LAMINATE-COVERED LINEN CLOSET DOOR Install hinged solid doors on the linen cabinet. Cover in laminate to match the interior. 2900-1070 1 PIANO HINGE FOR LINEN CLOSET TOP DOOR The upper linen cabinet door(s) is/are to use piano style hinge. 2900-1072 1 PIANO HINGE FOR LINEN CLOSET MIDDLE DOOR The middle linen cabinet door(s) is/are to use piano style hinge. 2900-1074 1 PIANO HINGE FOR LINEN CLOSET LOWER DOOR Quote # QUO0000006012 February 27, 2021 Page 9 Spec Writer: Levi C. Spec Designer: The lower linen cabinet door(s) is/are to use piano style hinge. SR00116625 1 LOCKING C2 LATCH - ELECTRONICS Install a locking C2 lever latch on the electronics cabinet door. 2900-1062 1 LATCHES, NFPA STYLE, LEVER TYPE, Middle linen cabinet Install spring loaded lever style latches on the interior cabinet noted above. Latch meets NFPA 1917 standards. 2900-1067 1 LATCHES, NFPA STYLE, LEVER TYPE, Lower linen cabinet Install spring loaded lever style latches on the interior cabinet noted above. Latch meets NFPA 1917 standards. 2000-0343 1 STREETSIDE WALL WITH CPR SEAT Street side cabinet wall to include a CPR seat. SR00116642 1 Install an aluminum sharps/waste cabinet recessed below the rear portion of the inhalation area countertop.  Top of cabinet to be even with top of countertop.  Include sliding port laminate covered aluminum doors in a lift-up frame for container access.  Install hinge on left side to open toward the CPR seat.  Set up for (2) #8970 containers, (1) to have lid removed for waste. 2000-0310 1 CPR SEAT, 28" WIDTH Streetside CPR seat width to be 28". 2900-4087 1 ANGLED UPPER CABINET, FORWARD OF CPR SEAT The upper cabinet forward of the CPR seat is to be angled. 2900-4094 1 STRAIGHT UPPER CABINET, AFT OF CPR SEAT 18.75H x 34.50W x 16D The upper cabinet aft of the CPR seat is to be straight with no angle. 2900-1171 1 ADJUSTABLE SHELVING, REAR CPR CABINET Install painted adjustable shelving in upper cabinet aft of the CPR seat. 2900-1178 1 ACRYLIC SLIDING, REAR CPR CABINET Cabinet specified above is to have sliding acrylic doors. 2900-1164 1 LIFT UP CABINET FRAMES, REAR CPR CABINET Install a flip-up restocking cabinet frame on cabinet noted above. Includes gas shocks and latches. 2900-4103 1 LIFT UP CABINET FRAMES, UPPER INHALATION CABINET Install a flip-up restocking cabinet frame on cabinet noted above. Includes gas shocks and horizontal latches. 2000-2058 1 UPPER INHALATION CABINET 12.75H x 40.75W x 16D Upper inhalation cabinet dimensions are to be as noted above. Note that dimensions are I.D. 2900-1102 1 ACRYLIC SLIDING DOORS, UPPER INHALATION CAB. Cabinet specified above is to have sliding 3/8" acrylic doors. 2900-1094 1 INTERIOR SHELVING, UPPER INHALATION CABINET Install painted adjustable shelving in upper inhalation cabinet. 2000-2059 1 LOWER INHALATION CABINET 12.75H x 38.75W x 16D Cabinet below the inhalation area dimensions are to be as noted above. Note that dimensions are I.D. 2900-1125 1 ACRYLIC SLIDING DOORS, LOWER INHALATION CAB. Cabinet specified above is to have sliding acrylic doors. 2000-0347 1 STORAGE BENEATH THE CPR SEAT Provide a hinged CPR seat cushion with storage located underneath. 2000-0349 2 GAS HOLD OPEN FOR LIFT UP CPR SEAT CUSHION Quote # QUO0000006012 February 27, 2021 Page 10 Spec Writer: Levi C. Spec Designer: Provide a gas holdopen on the flip-up CPR seat cushion to keep the cushion in the upright position when opened. SR00116590 1 Include a gas hold open on each end of CPR seat - total of (2) 2000-0348 1 RECESSED PADDLE LATCH. CPR SEAT Provide a recessed paddle latch in the cabinet riser to secure access to the CPR seat storage area. CURBSIDE CABINETRY 2000-0359 1 SQUAD BENCH WITH NO CUPS OR WELLS Provide storage under the squad bench lid/cushion(s). The area shall run where possible under the bench. The storage pan is to be fabricated from aluminum and painted to match the interior. SR00116584 1 Install an aluminum sharps/waste cabinet at the head of the bench to have sliding port laminate covered aluminum doors in a lift-up frame for access to containers.  Top of cabinet to be even with top of bench cushion.  Install hinge on left-hand side of lid to open toward crash barrier.  Pad the inboard rear facing corner for occupant protection.  Set up for (2) 8970 containers, (1) to have lid removed for use as a waste. SR00116851 1 Install a rear facing pull-out drawer at the top of the crash barrier.  Size:  13.25"W x 6"H x 18"D (All I.D.)  Include a gas spring hold open to allow drawer to remain in open position when necessary.  Include large side-mounted slides.  All surfaces of drawer tray to be non-painted with a D/A finish. SR00116852 1 RECESSED GLOVE STORAGE FACING STEPWELL -  Provide a (3) box recessed glove storage in the stepwell side of the crash barrier per drawing.  Glove to be accessed via oval cutouts in a top hinged Acrylic door with flush pull ring latch.  Glove box size:  5.5"W x 10.5"H x 4"D (unless otherwise specified) SR00116853 1 CABINET WITH DRAWERS AT FOOT OF BENCH -  Install a recessed drawer cabinet at the foot of the bench to house (2) drawers.  Include a flat (no flanges) solid surface countertop.  Reinforce countertop to allow for customer installation of Technimount LP15 monitor bracket.  Maintain 20" clearance between countertop and bench ceiling cabinet.  Install (2) pull-out drawers that open toward the bench per drawing.  Size:  13.25"W x 3"H x 16.5"H (All I.D.) - Upper  13.25"W x 5"H x 16.5"H (All I.D.) - Lower  Lower drawer to house a Smithworks IV warmer and 12v outlet (both spec'd elsewhere).  Both drawers to have large side-mounted slides.  All surfaces of drawer trays to be non-painted with a D/A finish. SR00116854 1 Install recessed glove storage in the upper curbside rear compartment per drawing.  Gloves to be accessed via oval cutouts in a left-hinged Acrylic door with flush pull ring latch.  Glove box size:  5.5"H x 10.5"W x 4"D (unless otherwise specified)  Note:  Diamond plate closeout in curbside rear compartment spec'd elsewhere. 8000-0056 1 BENCH END RESTRAINT FOR USE WITH HOPS, DELETE Quote # QUO0000006012 February 27, 2021 Page 11 Spec Writer: Levi C. Spec Designer: SR00116583 1 CRASH BARRIER CARGO NET - Include (6) Ferno buckle style straps spaced evenly across the aisle side I/O opening - (3) across the top and (3) across the bottom.  Mount the vertical straps with the female ends attached to the top and bottom of the net. 2000-0743 1 SINGLE CUSHION SQUAD BENCH The squad bench cushion is to be one piece. 2000-0380 1 BENCH HOLD OPENS: GAS Install gas spring hold opens on squad bench lid. SR00116591 1 BENCH HOLD OPEN CONFIGURATION - Include (1) gas hold open on each end of the reduced length bench. 2000-0585 1 BENCH HOLD-DOWN: PADDLE LATCHES (SINGLE) Install a recessed paddle latch into the squad bench riser to retain the squad bench lid in the closed position.  2000-0382 1 BENCH CUSHION EDGE TRIM: Trim bench cushion edge with protective aluminum trim, to protect horizontal edge of squad bench cushion from tears. 2000-0383 1 BENCH BACK CUSHION: FULL SIZE Install full size bench backrest cushion. SR00116576 1 BENCH CABINET, HINGED DOORS  Fabricate and install a bench ceiling cabinet above the squad bench with lift up 3/8" acrylic doors.  Cabinet to extend from curbside entry door to rear wall.  NOTE - Include (5) equal size top-hinged doors with flush pull ring latches.  Each door to have (3) self-closing hinges and a gas hold open. 2900-1130 5 SOUTHCO LATCH OVERHEAD BENCH CABINET Install stainless flush mount Southco pull latches on the bench ceiling cabinet. 2900-1135 15 SELF CLOSING HINGE FOR OVERHEAD BENCH CABINET The bench ceiling cabinet door(s) is/are to use self-closing style hinges. 2900-1134 4 FIXED DIVIDER, BENCH CEILING CABINET Spaced Evenly to Create (5) Equal Sections Install a fixed aluminum vertical cabinet divider. FRONT WALL CABINETRY 2000-1404 1 CAB TO MODULE PASSTHROUGH WINDOW Provide a sliding pass-through window between the patient area and the chassis cab on the cab side. VISUAL WARNING 3600-5009 2 M6 R/W SPLIT/CLEAR LENS Rear Wheel Well Lights - Red Forward Install Whelen M6 series LED lights as noted. Lights to be red/white split with clear lenses. Lights to include chrome flanges and flash pattern programmability from the front control panel. 3300-5017 2 M9 BLUE/CLEAR LENS Front Face - [B] [B] [W/B] [W] [R/W] [R] [R] Install Whelen M9 series LED lights as noted. Lights to be blue with clear lenses. Lights to include chrome flanges and flash pattern programmability from the front control panel. 3400-5017 2 M9 BLUE/CLEAR LENS (1) Streetside Front, (1) Curbside Rear Install Whelen M9 series LED lights as noted. Lights to be blue with clear lenses. Lights to include chrome flanges and flash pattern programmability from the front control panel. 3000-5085 1 M9 White Clear Lens Front Center KKK Quote # QUO0000006012 February 27, 2021 Page 12 Spec Writer: Levi C. Spec Designer: Install a Whelen M9 series LED light centered on the front face of the body. Light is to be white with a clear lens. Light is to include a chrome flange and flash pattern programmability from the front control panel. 3000-5104 1 M7 Amber/Clear Lens Rear Center KKK Install a Whelen M7 series LED light centered on the rear face of the body above the rear doors. Light is to be amber with a clear lens. Light is to include a chrome flange and flash pattern programmability from the front control panel. 3000-5018 2 M9 RED/CLEAR LENS Front Face - [B] [B] [W/B] [W] [R/W] [R] [R] Install Whelen M9 series LED lights as noted. Lights to be red with clear lenses. Lights to include chrome flanges and flash pattern programmability from the front control panel. 3200-5018 4 M9 RED/CLEAR LENS (1) Streetside Rear, (1) Curbside Front, (2) Rear Face - Upper Outboard Corners per Drawing Install Whelen M9 series LED lights as noted. Lights to be red with clear lenses. Lights to include chrome flanges and flash pattern programmability from the front control panel. 3500-5021 1 M9 R/W SPLIT/CLEAR LENS Front Face - [B] [B] [W/B] [W] [R/W] [R] [R] Install Whelen M9 series LED lights as noted. Lights to be red/white split with clear lenses. Lights to include chrome flanges and flash pattern programmability from the front control panel. SR00116589 1 M9 BLUE/WHITE SPLIT LED LIGHT - Install a Whelen M9 Blue/White split LED light with clear lens and chrome flange on front face:  [B] [B] [B/W] [W] [R/W] [R] [R] SR00116626 1 Install (2) Whelen wide-angle ION series LED lights with chrome flanges on upper bar of grille.  Locate:  Blue - passenger's side  Red - driver's side SR00116627 1 Install (2) Whelen M4 Red/Blue split LED lights with chrome flanges.  Locate:  (1) on each chassis fender as intersection lights. SR00117479 1 CUSTOMER SUPPLIED PRE-EMPTION SYSTEM - Install a customer-supplied Tomar #3065R pre-emption emitter with filter on front face per drawing.  Locate the remote power supply in the electrical compartment.  IATS, wire emitter to a customer-supplied Opticom #2100 high priority radio/GPS control unit.  Install this unit in electronics cabinet.  System to include a model 1500 radio antenna.  Mount antenna on module roof (above streetside front compartment).  Both pre-emption systems to be powered on in emergency mode and shall cancel in "Park".  Systems must also be able to be activated with one switch without emergency lights activated (and cancel in "Park")  Note - All items are to be customer supplied. 3000-0136 1 FLASH PATTERN, VARIABLE A,B Program the emergency lighting flash pattern to variable A/B. 3000-5109 1 Chevron Style Lighting Red/Amber Install 12" LED light strips with bezels on the rear of the body five (5) per side. Lights are to be installed at an angle to mimic a chevron pattern. To include (3) red and (2) amber on either side of the rear doors in an alternating pattern. SR00116879 1 Provide separate on/off switches for each color of light.  Both color lights to default to "ON" with "Emergency Master" switch. Quote # QUO0000006012 February 27, 2021 Page 13 Spec Writer: Levi C. Spec Designer: AUDIBLE WARNING 3000-0175 1 SIREN, WHELEN 295HFSA7 Speaker 1- Wail, Yelp, Pierce. Speaker 2- Wail, Yelp, Pierce Install a Whelen 295HFSA7 siren in the front console. 3000-1851 1 SIREN, WHELEN HOWLER, F SERIES Install a Whelen Howler low frequency siren. 3000-1543 1 SPEAKERS, CAST PRODUCTS, F SERIES Install Cast Products siren speakers, applicable to Ford F-Series chassis, in the front bumper. NON-EMERGENCY LIGHTING 3000-0208 1 KKK SIDE BODY MARKER LIGHTS, M6 SERIES LED (PAIR) Install red Whelen M6 series LED turn/marker lights on each rear side of the module body. Lights provide module body night time side lighting visibility and turning signal indication. Lights do not flash with warning lights unless otherwise specified. Includes chrome flanges. 3000-0217 1 LED EXTERIOR COMPARTMENT LIGHTING Install full height LED strip lighting in all exterior compartments with the exception of any wheelwell compartments. Install vertical strips inside both sides of each compartment. The lights are to be directed toward the back of each compartment. 3000-0847 1 WHELEN 0S SERIES MARKER LIGHTS. Install Whelen 0S series ICC marker lights. 3000-0240 1 M9 SERIES LED SCENE LIGHT, STREETSIDE FRONT Install a Whelen M9 LED side scene light with chrome flange on the upper streetside forward portion of the body. 3000-0741 1 M9 SERIES LED SCENE LIGHT, STREETSIDE REAR Install a Whelen M9 LED side scene light with chrome flange on the upper streetside rear portion of the body. 3000-0748 1 M9 SERIES LED SCENE LIGHT, CURBSIDE FRONT Install a Whelen M9 LED side scene light with chrome flange on the upper curbside forward portion of the body. 3000-0762 1 M9 SERIES LED SCENE LIGHT, CURBSIDE REAR Install a Whelen M9 L.E.D. side scene light with chrome flange on the upper curbside rear portion of the body. 3000-1633 1 LOAD LIGHTS, M9 SERIES LED Install two Whelen M9 LED load lights with chrome flanges above the rear body entry doors. 3000-1438 1 TAIL LIGHTS, M6 SERIES, HORIZONTAL MOUNTED Install Whelen M6 series LED stop/tail, turn, and reverse lights. Install the stop/tail and reverse lights in the rear riser/kick plate with brake/tail outboard. Install the turn signals above in the rear body panels. Lights to include chrome flanges. 3000-0267 1 ARROW LIGHTS M6 SERIES LED, FRONT Install (2) Whelen M6 series LED turn signals on the front face of the body below the outboard flashers and wire into the turn signal circuit. Lights to include chrome flanges. ELECTRICAL SR00116859 1 Install (3) Whelen OS series lights - (1) Red and (2) Amber - with chrome flanges to serve as interior brake and turn signal indicators.  Locate on the header panel above the rear entry doors below the clock per drawing. 3000-0018 1 ELECTRIC DOOR LOCKS COMPARTMENT EXTERIOR Install power activated door locks on all exterior compartment doors. Locks to be activated by a switch at each patient area access door. Locks may be overridden by a door key. Quote # QUO0000006012 February 27, 2021 Page 14 Spec Writer: Levi C. Spec Designer: 3000-0019 1 ELECTRIC DOOR LOCKS ACCESS DOORS INTERIOR Install power activated door locks on all patient area access doors. Locks to be activated by a switch at each patient area door. Locks may be overridden by a manual slide lever or by the door key. 3000-0022 1 ELECTRIC DOOR LOCKS WIRED TO OEM SWITCHES The specified power door locks are to be wired to the chassis OEM door lock switches. 3000-0451 1 ELECTRIC DOOR LOCKS CONCEALED LICENSE PLATE Install a concealed switch in the license plate bracket to operate the power door lock circuit. Doors shall be wired to unlock only on this circuit. 3000-1265 1 IV WARMER, SMITHWORKS Drawer at Rear of Bench per Drawing A Smithworks IV warmer will be installed as noted.  The warmer will be wired to 12V ignition activated power, and be shoreline activated. Requires (1) 12v outlet selected separately. 3000-0282 1 ELECTRICAL SYSTEM Install the Intelliplex i4G electrical system. System is to include a USB port installed under the dash for ease of programming. SR00116577 1 Install a 12-volt prewire for a dealer-installed Power Load system.  Wire Power Load pre-wire #350 to circuit #165 (battery hot) SR00116586 1 REAR CONTROL PANEL LOCATION - Locate the rear control panel on the curbside wall below the oxygen outlet per drawing.  Panel to be mounted on an 15 degree angled housing to allow for better visibility from the  bench seating area. (see Des Moines #19771 which had a 3-switch panel on a small angled housing) 3000-0305 1 INPOWER BATTERY SWITCH, WITH WAKE BUTTON 5 min. Install an Inpower electronic battery switch. Switch is to activate battery power through the vehicle ignition and is to include an automatic shutdown timer to deactivate battery power after the ignition is turned off. To include a wake button installed on the front console to activate the electrical system without using the key. 3000-2151 1 VANNER CHARGER/STATUS PANEL Install a Vanner charger/status panel in standard location. 3000-2161 1 1050CUL-DC, AUTO SWITCHED Install a Vanner #20-1050CUL-DC combination inverter/charger in the vehicle's designated electrical compartment. Inverter to engage when engine is running. Unit is to power all 110V outlets. Charger is to be wired off of the shoreline. 3000-0310 4 110V INTERIOR OUTLET (1) Inhalation Area, (1) Streetside Rear Compartment (Surface Mount), (2) Crash Barrier Compartment (Bench Wall) per Drawings Install a 110V outlet(s) as noted. SR00116637 1 Install (3) Hubbell 110-VAC/USB combination outlets. (Hubbell #USB8200W, HPN #10013883)  Locate:  (1) In inhalation area, (1) On curbside wall above forward portion of crash barrier countertop, (1) On curbside wall above rear portion of monitor countertop per drawing. 3000-0549 2 INTERIOR 12VDC OUTLETS: CL TYPE/USB (1) Inhalation Area, (1) 12v Only in Drawer at Rear of Bench for Smithworks per Drawing Install a 12VDC cigarette style/USB outlet(s) as noted. Wire battery hot. 3000-1465 1 SHORELINE 1, 20A  SUPER AUTO EJECT, YELLOW Mount a Kussmaul Super Auto Eject 20 amp shoreline inlet in the standard location. Cover is to be yellow. 3000-1489 1 SHORELINE 2, 20A SUPER AUTO EJECT, BLUE Quote # QUO0000006012 February 27, 2021 Page 15 Spec Writer: Levi C. Spec Designer: Mount a secondary Kussmaul Super Auto Eject 20 amp shoreline inlet in the standard location. Cover is to be blue. 3000-1501 1 PD BOX LOCATION, BEHIND DRIVER'S SEAT Install the power distribution box behind the driver's seat. 3000-0328 1 KUSSMAUL EZ PLATE, 20A SUPER AUTO EJECT #1 Install a Kussmaul EZ Plate for the selected 15/20A Super Auto Eject shoreline #1. 3000-2163 1 KUSSMAUL EZ PLATE, 20A SUPER AUTO EJECT #2 Install a Kussmaul EZ Plate for the selected 15/20A Super Auto Eject shoreline #2. 3000-0327 1 EXTRA 12VDC CIRCUIT BREAKER: INTERMEDIATE COMPT An extra circuit breaker shall be installed in the streetside intermediate compartment. 3000-0340 1 CLOCK, DIGITAL W/SECONDS: OVER REAR DOORS Install a Horton large face digital 12/24 hour clock with seconds display over the rear doors. 3000-0359 9 PATIENT CEILING DOME LIGHTS WHELEN LED Install Whelen 80C0EHCR LED dome lights in the patient area ceiling. The lights will have a high/low feature with the switch in the rear control panel. SR00116567 1 DOME LIGHT PROGRAMMING - Lights to operate at "HIGH" intensity when dome timer is manually activated.  With battery switch in "OFF" position, program the dome lights to activate at "LOW" intensity when a module access door is opened.  Lights to remain on for (5) minutes.  Include separate switches for each bank of lights. SR00116643 1 TECNIQ #E13 SERIES REPORT LIGHTS - Install (4) Tecniq #E13-WS0R-1 Red/White split LED lights with stainless steel trim rings.  Locate:  (1) Above inhalation area, (1) Centered above crash barrier countertop, (1) Centered above bench seating position, (1) Centered above curbside rear countertop.  Configure:  Activate the inhalation area light via a single switch in the inhalation area remote switch panel (Red/White/Off) and the rear control panel.  Activate both curbside lights simultaneously from the rear control panel (Red/White/Off). 3000-0522 1 3 SWITCH PANEL BOLSTER FACE STEP WELL Install an i4G 3-switch control panel on the bench bolster facing the stepwell. 3000-2100 1 TIMER, DOME LIGHTS. STEPWELL Install an electronic momentary touch timer switch in the specified I4g switch panel on the side of the bolster facing the side stepwell. The switch will enable time limited operation of the specified dome lights with the battery switch in the 'off' position. Set timer to 15 minutes. 3000-5049 1 SCENE LIGHT SWITCH, BOLSTER AT STEPWELL Install three (3) electronic momentary switches in the specified i4G style switch panel on the side of the bolster facing the side stepwell. The switches are to control the rear loading, street side scene and the curbside scene lights.  These switches shall override the position of the front control panel switches. The system shall default to normal operation with the door open circuit or by cycling the battery switch. 3000-5059 1 LOAD LIGHT SWITCH, i4G, BOLSTER AT STEPWELL Install load light control switch in the panel selected for the bolster facing the stepwell. 3000-0523 1 3 SWITCH PANEL INHALATION PANEL Install an i4G 3-switch control panel on the inhalation panel. 3000-2120 1 SWITCH, O2, INHALATION PANEL Install an electronic momentary switch in the specified i4G style 3-switch panel on the inhalation panel. The switch will activate the oxygen system. A second depression of the switch will deactivate the oxygen system. Quote # QUO0000006012 February 27, 2021 Page 16 Spec Writer: Levi C. Spec Designer: 3000-2127 1 SWITCH, SUCTION, INHALATION PANEL Install an electronic momentary switch in the specified i4G style 3-switch panel on the inhalation panel. The switch will activate the suction system. A second depression of the switch will deactivate the system. SR00118159 1 SWITCH, VENT, INHALATION PANEL  Install an electronic momentary switch in the specified i4G style 3-switch panel on the inhalation panel. The switch will activate the vent system. 3000-0525 1 3 SWITCH PANEL REAR DOOR PANEL Install an i4G 3-switch control panel on the right rear entry door panel. 3000-2103 1 TIMER, DOME LIGHTS, REAR DOOR PANEL Install an electronic momentary touch timer switch in the specified I4g switch panel on the right rear door panel. The switch will enable time limited operation of the specified dome lights with the battery switch in the 'off' position. Set timer to 15 minutes. 3000-5042 1 DUMP OVERRIDE, i4G, REAR DOOR PANEL Install the dump override switch in the panel selected for the right rear entry door inner panel. SR00116858 1 PRIVACY WINDOW SWITCH, i4G, REAR DOOR PANEL  Install a privacy window switch in the panel selected for the right rear entry door inner panel. 3000-0007 1 BACKUP ALARM RESET, MOMENTARY Install a back-up alarm and provide a momentary backup alarm reset button on the front console. 3000-0031 1 CAMERA LOCATION: OVER REAR DOORS, EXTERIOR The integrated camera system noted is to include a camera installed over the rear doors on the vehicle exterior for use in reverse. SR00116565 1 BRIGADE CAMERA MONITOR - Install a 7" Brigade VBV-770-FM windshield mounted monitor with VBV- XM003 (3) meter extension cable.  Function - TBD 3000-0032 1 CAMERA LOCATION: OVER REAR DOORS, INTERIOR The integrated camera system noted is to include a camera installed over the rear doors on the vehicle interior for use as a patient compartment monitor. PROGRAMMING 6000-0001 1 LIGHT PROGRAMMING: SIDE REAR SCENE The side rear scene lights shall be wired to transmission reverse, plus standard mode of operation. 6000-0002 1 LIGHT PROGRAMMING: RIGHT SIDE SCENE The right side scene lights shall come "on" when the side patient door is opened. 6000-0003 1 LIGHT PROGRAMMING: LOAD LIGHT Program the rear load lights to activate with transmission reverse plus the standard mode of operation. 6000-0018 1 WHITE LIGHT CUTOFF SWITCH Provide a switch in the front control panel to deactivate all forward facing white lights. This includes wig wag flashers if ordered. 6000-0019 1 REAR LIGHT DIMMER SWITCH Provide a switch in the front control panel to dim all rear-facing lights to 50% illumination. 6000-0006 1 PROGRAMMING: AUDIBLE LOW VOLTAGE ALARM Program an audible alarm to activate if the voltage drops below 11.8 volts for 120 seconds. Quote # QUO0000006012 February 27, 2021 Page 17 Spec Writer: Levi C. Spec Designer: 6000-0007 1 LIGHT PROGRAMMING: PARK BRAKE Program a warning to display on the front console readout advising to set the Parking Brake when the module disconnect switch is "ON" and the transmission is placed in "PARK" or "NEUTRAL". It will also advise to Disengage the Parking Brake should the vehicle be placed into gear. SR00118167 1 BRAKE ACTIVATED CHEVRON LIGHTING  The brake light function shall override the warning light function. 6000-0012 1 TURN SIGNAL ACTIVATED CHEVRON LIGHTING The amber conspicuity/chevron lighting is to wired to operate as auxiliary turn signals when not in warning mode. 3000-1269 1 MODULE DISCONNECT, DEFAULT TO "ON" Program the Module Disconnect to 'On' with battery activation. HVAC 3000-4028 1 12V/110V HVAC, ATTENDANT'S SEAT Install a ProAir Pre-charged 12V/110V heat/AC system with brushless motor below the attendant seat.  3000-4033 1 CHASSIS TIE IN FOR OEM CONDENSER, F SERIES 2000-0435 1 VENT CAST PAINTED NFPA STYLE Install an NFPA style venting system to include a 400cfm exhaust fan along with a static vent. Install 9.5" square cast covers on both vents per drawings. Covers to be painted body color. RADIO 3000-0432 1 ANTENNA COAX 1 Start: Cab Console, End: Front Center of Mod Roof An RG 58U coax shall be installed terminating as noted above. 3000-0608 1 ANTENNA COAX 2 Start: Inhalation Wall, End: Center of Mod Roof An RG 58U coax shall be installed terminating as noted above. 3000-0434 1 3/8" NMO MOUNT COAX 1 Supply and install a 3/8" NMO mount in conjunction with specified coax #1. 3000-0618 1 3/8" NMO MOUNT COAX 2 Supply and install a 3/8" NMO mount in conjunction with specified coax #2. 3000-1174 1 PULL WIRE 1 Start: Behind Driver Seat, End: Inhalation Wall Install a radio cable pull wire terminating as noted above. Wire is not to be wire tied or otherwise prevented from moving freely. 3000-0441 1 RADIO PULL WIRE CONDUIT Install a radio pull wire conduit. Termination points are to be determined by the the termination points of the specified pull wire. SR00116814 1 Conduit to be 2" smooth wall continuous. 3000-0624 1 REAR RADIO HEAD PANEL: BLANK 3 A blank removable panel shall be installed in the inhalation panel for future installation of radio heads as noted. 1000-0411 1 CONSOLE, LINE-X, W/MAP STORAGE, F SERIES Fabricate and install an aluminum cab console and spray with black Line-X material. Console is to include three (3) map/book slots at the rear of the console. 1000-0179 1 CUP HOLDERS, 2-TIER Install two (2) two-tier style cup holders recessed into the console. 1000-0401 1 CONSOLE EXTENSION, F SERIES Quote # QUO0000006012 February 27, 2021 Page 18 Spec Writer: Levi C. Spec Designer: Fab and install an aluminum console extension for mounting radio heads and storing maps, books, and binders. Attach to the standard console (selected separately). Standard box includes (3) 2.5 storage sections, and 8.5 faceplate for radio mounting. Apply black Line-X. SR00118166 1 POWER TERMINAL, DUAL, INSIDE CONSOLE  Install three (3) 6 gauge 50 amp cables to positive and ground studs for radio power. Wire one constant hot, one battery switched, and the third as a ground.  POWER TERMINAL, DUAL, INHALATION PANEL  Install three (3) 6 gauge 50 amp cables to positive and ground studs for radio power. Wire one constant hot, one battery switched, and the third as a ground. OXYGEN 4000-0165 1 O2 MOUNT, VERTICAL TRACK FOR QRM-V Vertical track for mounting of a QRM-V O2 bottle mount shall be welded on the back wall of the streetside forward compartment in the right hand corner. Bracket will be set up for an 'H' sized bottle. 4000-0166 1 O2, CYLINDER BRACKET: ZICO QRM-V Install a Zico QRM-V oxygen bracket for 'H' bottle. Locate in the streetside forward compartment. SR00116566 1 OXYGEN ACCESS  Provide access to the oxygen cylinder valve through the wall as depicted on the drawings. Door material is to match other selected cabinet doors. The opening shall be 7" wide x 11" high and trimmed with anodized aluminum.  Note - Door to swing into the patient care area of the module.  Include a Southco flush pull ring latch. 4000-0022 3 O2 OUTLET, OHIO MEDICAL (1) Inhalation Area, (1) Ceiling, (1) Curbside Wall Above Head of Bench per Drawing Install O2 outlets per instructions above. Outlets to be Ohio Medical style. 4000-0025 1 OXYGEN WRENCH Install oxygen wrench in oxygen compartment. Mount securely to wall. Mount with length of chain or cable to allow for use without being removed from the compartment. 3000-0642 1 VACUUM OUTLET, OHIO MEDICAL (1) Inhalation Area Install a single Ohio style vacuum outlet. Locate per drawings. 4000-0179 1 ASPIRATOR, SSCOR, INHALATION AREA Install an SSCOR aspirator. The system shall include a wall mounted regulator and a canister holder. Plumb to the selected pump. 4000-0184 1 VACUUM PUMP CFP #107CDC20 Install a CFP #107CDC20 12vdc electric suction pump. CERTIFICATIONS 7000-0001 1 KKK-A-1822F CERTIFICATION LABEL The vehicle shall have weight/payload, electrical load and KKK-A-1822F certification stickers installed in the O2 compartment.